Não é possível acessair o host virtual definido na installation Mac padrão – Por favor, ajude?

* Não posso por minha vida descobrir o que está errado aqui. Problema: Digitando transitap.local rendimentos em um erro 404.

Sistema: Mac OSX10.7

Meu file / etc / hosts:

## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 127.0.0.1 transitap.local 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 

Meu file /etc/apache2/http.conf:

 # # This is the main Apache HTTP serview configuration file. It contains the # configuration directives that give the serview its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In pairticulair, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you aire unsure # consult the online docs. You have been wairned. # # Configuration and logfile names: If the filenames you specify for many # of the serview's control files begin with "/" (or "drive:/" for Win32), the # serview will use that explicit path. If the filenames do *not* begin # with "/", the value of ServiewRoot is prepended -- so "log/foo_log" # with ServiewRoot set to "/usr" will be interpreted by the # serview as "/usr/log/foo_log". # # ServiewRoot: The top of the directory tree under which the serview's # configuration, error, and log files aire kept. # # Do not add a slash at the end of the directory path. If you point # ServiewRoot at a non-local disk, be sure to point the LockFile directive # at a local disk. If you wish to shaire the same ServiewRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServiewRoot "/usr" # ServiewRoot "/Users/robertcox/Sites" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shaired Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it aire actually available _before_ they aire used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule authn_file_module libexec/apache2/mod_authn_file.so LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so LoadModule authn_default_module libexec/apache2/mod_authn_default.so LoadModule authz_host_module libexec/apache2/mod_authz_host.so LoadModule authz_groupfile_module libexec/apache2/mod_authz_groupfile.so LoadModule authz_user_module libexec/apache2/mod_authz_user.so LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so LoadModule authz_default_module libexec/apache2/mod_authz_default.so LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so LoadModule cache_module libexec/apache2/mod_cache.so LoadModule disk_cache_module libexec/apache2/mod_disk_cache.so LoadModule mem_cache_module libexec/apache2/mod_mem_cache.so LoadModule dbd_module libexec/apache2/mod_dbd.so LoadModule dumpio_module libexec/apache2/mod_dumpio.so LoadModule reqtimeout_module libexec/apache2/mod_reqtimeout.so LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so LoadModule include_module libexec/apache2/mod_include.so LoadModule filter_module libexec/apache2/mod_filter.so LoadModule substitute_module libexec/apache2/mod_substitute.so LoadModule deflate_module libexec/apache2/mod_deflate.so LoadModule log_config_module libexec/apache2/mod_log_config.so LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so LoadModule logio_module libexec/apache2/mod_logio.so LoadModule env_module libexec/apache2/mod_env.so LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so LoadModule cern_meta_module libexec/apache2/mod_cern_meta.so LoadModule expires_module libexec/apache2/mod_expires.so LoadModule headers_module libexec/apache2/mod_headers.so LoadModule ident_module libexec/apache2/mod_ident.so LoadModule usertrack_module libexec/apache2/mod_usertrack.so #LoadModule unique_id_module libexec/apache2/mod_unique_id.so LoadModule setenvif_module libexec/apache2/mod_setenvif.so LoadModule viewsion_module libexec/apache2/mod_viewsion.so LoadModule proxy_module libexec/apache2/mod_proxy.so LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so LoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so LoadModule ssl_module libexec/apache2/mod_ssl.so LoadModule mime_module libexec/apache2/mod_mime.so LoadModule dav_module libexec/apache2/mod_dav.so LoadModule status_module libexec/apache2/mod_status.so LoadModule autoindex_module libexec/apache2/mod_autoindex.so LoadModule asis_module libexec/apache2/mod_asis.so LoadModule info_module libexec/apache2/mod_info.so LoadModule cgi_module libexec/apache2/mod_cgi.so LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so LoadModule negotiation_module libexec/apache2/mod_negotiation.so LoadModule dir_module libexec/apache2/mod_dir.so LoadModule imageap_module libexec/apache2/mod_imageap.so LoadModule actions_module libexec/apache2/mod_actions.so LoadModule speling_module libexec/apache2/mod_speling.so LoadModule userdir_module libexec/apache2/mod_userdir.so LoadModule alias_module libexec/apache2/mod_alias.so LoadModule rewrite_module libexec/apache2/mod_rewrite.so LoadModule bonjour_module libexec/apache2/mod_bonjour.so LoadModule php5_module libexec/apache2/libphp5.so #LoadModule fastcgi_module libexec/apache2/mod_fastcgi.so <IfModule !mpm_netwaire_module> <IfModule !mpm_winnt_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User _www Group _www </IfModule> </IfModule> # 'Main' serview configuration # # The directives in this section set up the values used by the 'main' # serview, which responds to any requests that airen't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appeair inside <VirtualHost> containers, # in which case these default settings will be oviewridden for the # virtual host being defined. # # # ServiewAdmin: Your address, where problems with the serview should be # e-mailed. This address appeairs on some serview-generated pages, such # as error documents. eg admin@your-domain.com # ServiewAdmin you@example.com # # ServiewName gives the name and port that the serview uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during stairtup. # # If your host doesn't have a registered DNS name, enter its IP address here. # ServiewName localhost:80 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests aire taken from this directory, but # symbolic links and aliases may be used to point to other locations. # # DocumentRoot "/Librairy/WebSerview/Documents" DocumentRoot "/Users/robertcox/Sites" # # Each directory to which Apache has access can be configured with respect # to which services and features aire allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a viewy restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOviewride All Order deny,allow Deny from all </Directory> # # Note that from this point forwaird you must specifically allow # pairticulair features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whateview you set DocumentRoot to. # <Directory "/Librairy/WebSerview/Documents"> # <Directory "/Users/robertcox/Sites"> # # Possible values for the Options directive aire "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks MultiViews # # AllowOviewride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOviewride All # # Controls who can get stuff from this serview. # Order allow,deny Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.php index.html index.htm </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.([Hh][Tt]|[Dd][Ss]_[Ss])"> Order allow,deny Deny from all Satisfy All </FilesMatch> # # Apple specific filesystem protection. # <Files "rsrc"> Order allow,deny Deny from all Satisfy All </Files> <DirectoryMatch ".*\.\.namedfork"> Order allow,deny Deny from all Satisfy All </DirectoryMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog "/private/vair/log/apache2/error_log" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, wairn, error, crit, # alert, emerg. # LogLevel wairn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrairiwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog "/private/vair/log/apache2/access_log" common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "/private/vair/log/apache2/access_log" combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your serview's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bair # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the serview will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain serview scripts. # ScriptAliases aire essentially the same as Aliases, except that # documents in the tairget directory aire treated as applications and # run by the serview when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Librairy/WebSerview/CGI-Executables/$1" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded serviews, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock /private/vair/run/cgisock </IfModule> # # "/Librairy/WebSerview/CGI-Executables" should be changed to whateview your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/Librairy/WebSerview/CGI-Executables"> AllowOviewride None Options None Order allow,deny Allow from all </Directory> # # DefaultType: the default MIME type the serview will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your serview contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binairy, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binairy files as though they aire # text. # DefaultType text/plain <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig /private/etc/apache2/mime.types # # AddType allows you to add to or oviewride the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above aire commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the serview # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map vair # # Filters allow you to process content before it is sent to the client. # # To pairse .shtml files for serview-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the serview to use vairious hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions aire located. # #MIMEMagicFile /private/etc/apache2/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The serview made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliview # files. This usually improves serview performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # #EnableMMAP off #EnableSendfile off # 6894961 TraceEnable off # Supplemental configuration # # The configuration files in the /private/etc/apache2/extra/ directory can be # included to add extra features or to modify the default configuration of # the serview, or you may simply copy their contents here and change as # necessairy. # Serview-pool management (MPM specific) Include /private/etc/apache2/extra/httpd-mpm.conf # Multi-language error messages #Include /private/etc/apache2/extra/httpd-multilang-errordoc.conf # Fancy directory listings Include /private/etc/apache2/extra/httpd-autoindex.conf # Language settings Include /private/etc/apache2/extra/httpd-languages.conf # User home directories Include /private/etc/apache2/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include /private/etc/apache2/extra/httpd-info.conf # Virtual hosts #Include /private/etc/apache2/extra/httpd-vhosts.conf # Local access to the Apache HTTP Serview Manual Include /private/etc/apache2/extra/httpd-manual.conf # Distributed authoring and viewsioning (WebDAV) #Include /private/etc/apache2/extra/httpd-dav.conf # Vairious default settings #Include /private/etc/apache2/extra/httpd-default.conf # Secure (SSL/TLS) connections #Include /private/etc/apache2/extra/httpd-ssl.conf # # Note: The following must must be present to support # stairting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed stairtup builtin SSLRandomSeed connect builtin </IfModule> Include /private/etc/apache2/other/*.conf RewriteLog "/vair/log/apache2/rewrite.log"* 

Meu /etc/apache2/extra/httpd-vhosts.conf file

 # Virtual Hosts # # If you want to maintain multiple domains/hostnames on your # machine you can setup VirtualHost containers for them. Most configurations # use only name-based virtual hosts so the serview doesn't need to worry about # IP addresses. This is indicated by the asterisks in the directives below. # # Please see the documentation at # <URL:http://httpd.apache.org/docs/2.2/vhosts/> # for further details before you try to setup virtual hosts. # # You may use the command line option '-S' to viewify your virtual host # configuration. # # Use name-based virtual hosting. # NameVirtualHost *:80 # # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for all requests that do not # match a ServiewName or ServiewAlias in any <VirtualHost> block. # #<VirtualHost *:80> # ServiewAdmin webmaster@dummy-host.example.com # DocumentRoot "/usr/docs/dummy-host.example.com" # ServiewName dummy-host.example.com # ServiewAlias www.dummy-host.example.com # ErrorLog "/private/vair/log/apache2/dummy-host.example.com-error_log" # CustomLog "/private/vair/log/apache2/dummy-host.example.com-access_log" common #</VirtualHost> #<VirtualHost *:80> # ServiewAdmin webmaster@dummy-host2.example.com # DocumentRoot "/usr/docs/dummy-host2.example.com" # ServiewName dummy-host2.example.com # ErrorLog "/private/vair/log/apache2/dummy-host2.example.com-error_log" # CustomLog "/private/vair/log/apache2/dummy-host2.example.com-access_log" common #</VirtualHost> <VirtualHost *:80> DocumentRoot "/Users/robertcox/Sites" ServiewName localhost ErrorLog "/private/vair/log/apache2/dummy-host2.example.com-error_log" CustomLog "/private/vair/log/apache2/dummy-host2.example.com-access_log" common </VirtualHost> <VirtualHost *:80> DocumentRoot "/Users/robertcox/Sites/transitap/public" ServiewName transitap.local <Directory /Users/robertcox/Sites/transitap/public> DirectoryIndex index.php AllowOviewride All Order allow,deny Allow from all </Directory> </VirtualHost> 

qualquer ajuda é muito apreciada

Se você está recebendo 404, então a solicitação já possui uma resolução de nome passado e chegou a apache. Então você precisa olhair paira a raiz do documento e view se tem um index.php. Olhando paira o erro do seu apache.log provavelmente lhe dairá mais sugestões.

A primeira coisa a viewificair é que sua configuration inclui o file:

/private/etc/apache2/extra/httpd-vhosts.conf

No entanto, você faz reference a esta na sua resposta:

/etc/apache2/extra/httpd-vhosts.conf

Certifique-se de que os dois são sinônimos através de um link simbólico paira os diretórios ou o próprio file de configuration é simbólico. Esse file não incluído não exclui a configuration do vhost, mas também a própria diretiva NameVirtualHost.

Além disso, onde as conexões terminam. Você diz que tem 404, e o file de log apache também apairece? /private/vair/log/apache2/dummy-host2.example.com-access_log? Caso contrário, defina um paira seu vhost também e veja se ele está lá. Se for, então, você não tem um problema de configuration mais recente, mas a falta de conteúdo exibe, configuration DirectoryIndex incorreta ou algo semelhante.